Friday 31 May 2013

Love is Pink - PTU




 I am using the art of Lynn Chua which you can find HERE 
I am using the PTU Scrapkit Valentine Doodle by Designs by Sarah and you can find that HERE
Mask of Choice
Font of Choice

Filters Used:
Eye Candy - Gradient Glow - 3 White
Gradient Glow - Fat - White and Pink

Open a new image 600x600
Open String Frame 2 and paste as a new layer - Resize by 90 and position in the centre
Click inside with your magic wand
Selections - Modify - Expand by 5
Open Paper 10 and paste as a new layer
Open your tube and position - Selections - Invert - Delete - Select None on both the paper and tube layers - Move under the frame
Apply Gradient Glow to the tube layer at the settings above
Open Ribbon 1 and paste as a new layer - Resize by 70 - Sharpen and position on the middle right of the frame
Open Deco 1 and paste as a new layer - Resize by 40 and then by 80 - Sharpen More
Position on the bottom right under your wordart - Duplicate and posisiton on the far left - Duplicate again
Resize by 90 and position next to the original - Duplicate and position next to the previous layer
Merge these layers all together - Repeat the above steps for the hearts and position at the top of the frame - Merge Down
Open Sequins 5 and paste as a new layer - Send to the bottom
Open Wordart 1 and paste as a new layer - Resize by 70 - Sharpen and position at the top
Apply Gradient glow at the second settings above

Open Paper 5 and paste as a new layer - Send to the bottom and apply a mask of choice - Merge Group
Add drop shadows to your layers - Merge Visible
Add correct copyright and licence information - Merge Down
Save as a png - Add your name - Save again - Done

Thursday 30 May 2013

Night of the Vamp - PTU


I am using the art of Barbara Jensen which you can find HERE
I am using the PTU Scrapkit Vamp by Skyscraps which you can find HERE
Mask of Choice
Font of Choice

Filters Used:
Xero - Porcelain - Default - Set blue to 0
Xero - Radiance - 128, 50, 128, 73

Open a new image 600x600
Open Element 53 and paste as a new layer - Resize by 80 - Sharpen
Position in the top left hand corner - Duplicate - Image - Mirror and merge down when happy
Open Element 2 and paste as a new layer - Resize by 60 - Sharpen and position toward the top
Click on the outside of the frame in the middle - the grey bit with your magic wand
Selections - Modify - Expand by 4 - Colorise the frame with a colour that matches your tube
I used Hue - 243 Saturation - 147 - Selections - Select None
Click inside the frame with your magic wand
Selections - Modify - Expand by 7 - Open Paper 1 and position in the frame
Selections - Invert - Delete - Select None and move under the frame
Open Element 78 and paste as a new layer - Resize by 90
Selections - Select All - Float - Defloat - Open your close up tubes and position on the right
Duplicate and position slightly below the original and move under
When happy - Selections - Invert - Delete - Select None and move above the paper layer
Open Element 65 and paste as a new layer - Resize by 80 - Position on the right of the frame and duplicate - Image - Mirror - Merge Down
Open Element 16 and paste as a new layer - Resize by 60 - Sharpen and position on the right
Open Element 23 and paste as a new layer - Resize by 70 - Sharpen and position on the left
Open Element 79 and paste as a new layer - Resize by 60 - Sharpen and position on the bottom right
Open Element 71 - Image - Mirror - Resize by 30 - Sharpen - Position on the bottom left - Duplicate - Image - Mirror and merge down
Open Element 66 and paste as a new layer - Image - Rotate - Free Rotate -  90 Left
Image - Resize by 60 - Sharpen - Click inside both of the frames with your magic wand
Selections - Modify - Expand by 5 - Open Paper 7 and paste as a new layer
I colorised mine - Same settings as before - Open your close up tubes again and paste in the frames
When happy - Selections - Invert - Delete - Select None and move both the paper and tube layers under the frame
Apply Porcelain at the settings above to the tube layers
Open Element 76 and paste as a new layer - Resize by 80 - Sharpen and position at the top
Open your main tube and paste as a new layer - Position in the centre of your tag
Open Element 58 and paste as a new layer - Resize by 60 - Sharpen - Position at the bottom of the tag - Duplicate - Merge Down
Open Element 73 and paste as a new layer - Resize by 40 - Sharpen - Position on the bottom right - Duplicate - Image - Mirror and merge down
Open Element 22 and paste as a new layer - Resize by 60 - Sharpen - Position on the right - Duplicate - Image - Mirror - Merge Down
Apply Radiance to your main tube at the settings above

Open Paper 6 and paste as a new layer - Send to the bottom and apply a mask of choice - Merge group
Add drop shadows to your layers - Merge Visible
Add correct copyright and licence numbers - Merge Down
Save as a png - Add your name - Save again - Done

Wednesday 29 May 2013

Pretty Autumn - PTU

I am using the art of Ellie Milk which you can find HERE 
I am using the PTU Scrapkit Victorian Meadow by Devilish Dezines which you can find HERE  
Mask of Choice
Font of Choice

Filters Used:
Xero - Fritillary - 5, 30, 10, 31

Open a new image 600x600
Open Frame 4 and paste as a new layer - Resize by 60 - Sharpen and position in the centre
Click inside with your magic wand - Selections - Modify - Expand by 4
Open Paper 7 and paste as a new layer - Position 
Open your tube and paste as a new layer - Position in the frame
When happy - Duplicate and hide for now
Selections - Invert - Delete - Select None on both the tube and paper layer
Apply Fritillary to the paper layer at the settings above
Move under the frame - We will unhide the duplicated layer later on
Open Frame 1 and paste as a new layer - Resize by 80 and position over the first frame
Open Element 94 and paste as a new layer - Resize by 60 - Sharpen and position along the bottom
Open Element 57 - Paste as a new layer - Resize by 80 - Sharpen and position on the left
Duplicate - Image - Mirror and merge down when happy
Open Element 84 and paste as a new layer - Resize by 40 - Sharpen and position on the top left
Duplicate - Image - Mirror and merge down when happy
Unhide your duplicated tube layer and erase the overhanging bottom parts
Open Element 65 and paste as a new layer - Resize by 80 - Sharpen and send to the bottom
Click on the paper layer - Open Element 35 - Resize by 20 - Sharpen
Position in the centre - Duplicate - Resize by 80 - Sharpen - Move below the original and merge down
Open Element 23 - Resize by 50 - Sharpen - Position at the bottom of the frame
Open Element 100 and  paste as a new layer - Resize by 40 - Sharpen - Position on the top left of the frame

Open Paper 5 and paste as a new layer - Send to the bottom and apply a mask of choice - Merge group
Add drop shadows to your layers - Merge Visible
Add correct copyright and licence information - Merge Down
Save as a png - Add your name - Save again - Done

Tuesday 28 May 2013

Nina - PTU

I am using the art of Skyscraps which you can find HERE
I am using the PTU Scrapkit Nina Terror by Tiny Turtle Designs made to match the tube which you can find HERE
Mask of Choice
Font of Choice

Filters Used:
Xero - Radiance - 100, 70, 128, 39

Open a new image 600x600
Open Element 57 and paste as a new layer - Resize by 90 - Sharpen
Position in the centre
Open Element 83 and paste as a new layer - Position over the previous layer
Click inside this with your magic wand
Selections - Modify - Expand by 5 - Open Paper 2 and paste as a new layer 
Open a close up of your tube and position - Selections - Invert - Delete - Select None and change the blend mode to Screen
Open Element 65 and paste as a new layer - Image - Mirror and position on the left of the tag
Click inside with your magic wand - Selections - Modify - Expand by 5
Open Paper 1 and paste as a new layer - Selections - Invert - Delete - Select None and move under the frame
Open your main tube and paste as a new layer - Resizing if necessary
Position on the left of the tag over the previous layer
Open Element 10 and paste as a new layer - Resize by 60 - Sharpen and position on the bottom of the tube
Open Element 9 and paste as a new layer - Resize by 70 - Sharpen and position on the bottom right
Click on the tube layer and open Element 100 - Resize by 70 - Sharpen and position toward the bottom
Duplicate and send to the top over the clock
Open Element 34 - Resize by 50 - Sharpen - Position on the right of the first frame
Open Element 8 and paste as a new layer - Send to the bottom
Click on the circular frame - Open Element 87 and paste as a new layer - Resize by 50 - Sharpen and position on the top right
Apply Radiance to your tube at the settings above

Open Paper 19 and paste as a new layer - Send to the bottom and apply a mask of choice - Merge Group
Add drop shadows to your layers - Merge Visible
Add correct copyright and licence information - Merge Down
Save as a png - Add your name - Save again - Done

Riding Hood - PTU

 I am using the art of Scarlet Gothica which you can find HERE until the 31st of this month
I'm not sure if and who she has signed with so watch this space!
I am using the PTU Scrapkit Riding Hood by Bibi which you can find HERE
Mask of Choice
Font of Choice

Filters Used:
Xero - Radiance - 118, 100, 148, 145

Open a new image 600x600
Open Element 95 and paste as a new layer - Resize by 70 - Sharpen and position in the centre
Click inside with your magic wand
Selections - Modify - Expand by 6
Open Paper 1 and paste as a new layer
Open your tube and position on the left - Duplicate and hide when happy with positioning
Also Open Element 74 - Image - Mirror and position to the right
When happy - Selections - Invert - Delete on all the layers - Move under the frame and unhide the duplicated tube
Erase the overhanging parts with your eraser tool
Open Element 92 and paste as a new layer - Resize by 60 - Sharpen and send to above the paper layer
Erase any overhanging parts
Open Element 28 and paste as a new layer - Resize by 40 - Sharpen - Position in between the house and tube
Open Element 91 - Resize by 50 - Sharpen - Position next to the house and place below
Open Element 32 - Resize by 85 - Sharpen and send to the bottom
Open Element 20 - Resize by 60 - Sharpen and position on the bottom
Clck on the tree layer - Open Element 46 - Resize by 60 - Sharpen and position
Open Element 93 and paste - Position below the tube - See my tag for placement ideas
Open Element 77 - Resize by 60 - Sharpen - Move to the top right - Duplicate and position under the original - Merge down and send to the bottom
Apply Radiance to your tube layers at the settings above

Open Paper 7 and paste as a new layer - Send to the bottom and apply a mask of choice - Merge Group
Add drop shadows to your layers - Merge Visible
Add correct copyright and licence information - Merge Down
Save as a png - Add your name - Save again - Done

Monday 27 May 2013

Rocker Billie - PTU

I am using the art of Christine Marie Kotlark which you can find HERE 
I am using the PTU Scrapkit Rock and Roses by Toxic Desirez which you can find HERE 
Mask of Choice
Font of Choice

Open a new image 600x600
Open Frame 2 and paste as a new layer - Resize by 80 - Place in the centre
Click inside the frame with your magic wand
Selections - Modify - Expand by 7 - Open Paper 6 and paste as a new layer
Open your close up tube and position in the frame
When happy - Duplicate and hide for now
Selections - Invert - Delete - Select None and move both under the frame
Unhide the duplicate and erase the bottom of the tube that overhangs
Open Filmstrip - Resize by 80 - Sharpen and position at the bottom
Click inside all frames with your magic wand
Selections - Modify - Expand by 4 and Open Paper 5
Open your tube and position parts in the frames
Selections - Invert - Delete - Select None and move under the filmstrip layer
Change the blend mode of the little tubes to Multiply
Click on the round frame layer - Open Guitar - Resize by 60 - Sharpen and position on the top left
Open Splatter - Send to the bottom and resize by 130
Open Doodle - Resize by 80 - Sharpen and position below the filmstrip
Open Wordart and paste as a new layer - Resize by 60 - Sharpen and position on top of the filmstrip
Open Star Border - Image - Flip - Resize by 95 - Sharpen and position on the top right
Open Speakers - Resize by 50 - Sharpen - Position on the left of the filmstrip - Duplicate and position to the right - Merge Down
When happy with positioning - Move to below the filmstrip layer
Open Hand - Image - Mirror - Resize by 60 - Sharpen and position on the bottom right - Moving under the filmstrip
Open Sparkles - Resize by 80 - Sharpen - Position above the filmstrip
Duplicate and send to the bottom and move to the top

Open Paper 11 - Send to the bottom and apply a mask of choice - Merge Group
Add drop shadows to your layers - Merge Visible
Add correct copyright and licence information - Merge Down
Save as a png - Add your name - Save again - Done

Under the Sea - PTU

I am using the art of Derzi which you can find HERE 
I am using the PTU Scrapkit Super Elegant by Hania's Designs made to match the tube which can be found HERE 
Mask of Choice
Font of Choice

Filters Used:
Xero - Fritillary - Default

Open a new image 600x600
Open Element 75 and paste as a new layer - Resize by 80 - Sharpen
Image - Rotate - Free Rotate - 15 Left
Selections - Select All - Float - Defloat - Open a close up of your tube and position
When happy - Selections - Invert - Delete - Select None and change the blend mode of the tube to Lighten
Open Element 9 and paste as a new layer - Resize by 80 and position toward the top
Open Element 36 and paste as a new layer - Position on the left - Duplicate - Image - Mirror and merge down when happy
Open Element 94 and paste as a new layer - Position at the bottom of your tag
Open Element 41 and paste - Resize by 85 - Sharpen and position at the bottom
Open Element 43 - Paste as a new layer and position over the first layer
Open Element 76 and paste as a new layer - Send to above the previous layer
Open Element 90 - Resize by 85 - Sharpen and send to the bottom
Open your tube as a new layer and position on the bottom right of your tag
Open Element 85 and paste as a new layer - Resize by 70 - Sharpen and position on the bottom left
Open Element 63 and paste as a new layer - Resize by 50 - Sharpen and position over the fence layer
Open Element 64 - Resize by 90 - Position at the top under the cloud

Open Paper 8 and paste as a new layer - Send to the bottom and apply a mask of choice - Merge group
Apply Fritillary at the settings above to your paper layer
Add drop shadows to your layers and merge visible
Add correct copyright and licence information - Merge Down
Save as a png - Add your name - Save again - Done

Sunday 26 May 2013

Country Bumpkin - PTU



I am using the art of Vika Misticheskaya which you can find HERE
I am using the PTU Scrapkit Carry made to match the tube by Bibi and you can find that HERE
2 Masks of Choice
Font of Choice

Open a new image 600x600
Open Element 9 and paste as a new layer
Resize by 60 - Sharpen and position at the bottom
Open Element 68 - Resize by 80 - Sharpen and position at the top toward the left
Click inside all of the frames with the magic wand
Selections - Modify - Expand by 5
Open Paper 14 and paste as a new layer
Open your close up and position in the frame
Selections - Invert - Delete - Select None on both the tube and paper layer
Move under the frame and change the blend mode of the close up to Hard Light
Open Element 83 - Resize by 40 - Sharpen and position below the grass layer on the right
Open Element 74 and paste as a new layer - Resize by 80 - Sharpen and position to the bottom left
Open Element 50 and paste as a new layer - Resize by 70 - Sharpen and position on the bottom
Keeping on that layer - Open Element 28 - Resize by 85 - Sharpen and position in the centre
Open Element 54 - Resize by 40 - Sharpen More - Image - Mirror - Resize on the left of the tree
Open Element 8 - Paste as a new layer and resize by 80 - Send to the bottom and move toward the top
Open Element 11 and paste as a new layer - Send to the bottom
Open Element 112 - Resize by 70 - Sharpen - Move to the bottom left
Open Element 105 and paste under the car layer - Apply a circular mask of choice and merge group
Open Element 113 and paste - position on the right
Open Element 49 - Resize by 70 -Sharpen and send to the bottom
Open Element 13 and send to the bottom
Open Element 76 and paste as a new layer - Resize by 60 - Sharpen - Move to the bottom left
Open Element 90 - Resize by 50 - Sharpen and position on top of the window
Open Element 86 and paste - Resize by 70 - Sharpen and position on the right above the mask layer
Duplicate - Image - Mirror and position on the left of the mask layer
See my tag for placement idea's
Open Element 129 and paste as a new layer - Position between the 2 flower layers
Keeping on the same layer - Open Element 51 and paste - Position toward the bottom - Duplicate and position above the original - Merge Down

Open Element 5 and paste as a new layer - Send to the bottom and apply a mask of choice - Merge Group
Add drop shadows to your layers - Merge Visible
Add correct copyright and licence information - Merge Down
Save as a png - Add your name - Save again - Done

Saturday 25 May 2013

Think Happy - PTU






I am using the art of Martin Abel which you can find HERE 
I am using the PTU IB Anna Marine 31-1 Scrapkit by BabyCakes Scraps which you can find HERE 
Mask of Choice
Font of Choice

Filters Used:
Xero - Radiance - 46, 97,18,109

Open a new image 600x600
Open Element 16 and paste as a new layer - Resize by 80 - Sharpen and position toward the top
Open Element 14 and paste as a new layer - Resize by 70 - Sharpen and send to the bottom - Position in the centre of the frame
Click inside the frame with your magic wand
Selections - Modify - Expand by 6
Open Paper 5 and paste as a new layer - Selections - Invert - Delete and move under the frame
Apply Radiance to your tube at the settings above
Open Element 21 and paste as a new layer
Resize by 60 - Sharpen and send to the bottom
Open Element 22 - Resize by 60 - Sharpen - Move to the left of the tag and apply a slight radiance to it
Click on the frame - Open Element 18 - Resize by 60 - Sharpen - Position on the top left
Click on your frame - Open Element 24 and paste as a new layer
Resize this by 45 - Sharpen More - Position on the top right and angle slightly
Click on the frame - Open Element 25 and paste - Resize by 70 - Sharpen and position
Open your tube and paste as a new layer - Position in the centre and on top of the previous layer so it looks as if she is sitting on them
Apply Radiance to her at the settings above
Open Element 8 - Resize by 30 - Sharpen and position on the bottom left next to the gravestone

Open Paper 3 and paste as a new layer - Send to the bottom and apply a mask of choice - Merge Group
Add drop shadows to your layers - Merge Visible
Add correct copyright and licence information - Merge Down
Save as a png - Add your name - Save again - Done

Candy Baby - PTU

I am using the art of Ellie Milk which you can find HERE
I am using the PTU Scrapkit Candy Shoppe by Designs by Sarah which you can find HERE
Mask of Choice
Font of Choice

Filters Used:
Xero - Clarity - Default
Xero - Radiance - 143, 39, 94, 115

Open a new image 600x600
Open Frame 4 and paste as a new layer - Resize by 80 - Sharpen
Position in the centre - Click inside with your magic wand
Selections - Modify - Expand by 5
Open Paper 5 and paste as a new layer
Position in the frame - Open Shoppe - Position in the frame
Selections - Invert - Delete - Select None and move under the frame
Click on the frame layer - Selections - Select All - Float - Defloat
Open your tube and position on the left - Duplicate and hide for now
Selections - Invert - Delete - Select None - Unhide the duplicate and erase the bottom part of her
Open Beads - Resize by 80 - Sharpen - Position at the top - Duplicate - Image - Mirror - Merge Down and send to the bottom
Open Candy Machine 1 and paste as a new layer - Resize by 50 - Sharpen and position on the bottom right
Staying on the frame layer - Open Ribbon 4 and paste - Resize by 80 - Position on the top of the frame
Open Element 8 - Resize by 60 - Sharpen and position on the bottom left
Open Element 18 - Resize by 50 and then again by 70 - Sharpen and position on the bottom right
Open Element 16 - Repeat the above steps and position next to the previous cake
Open Element 17 - Paste as a new layer - Resize by 60 - Sharpen - Position on the bottom right above the frame layer
Duplicate - Image - Mirror and merge down
Open Bow 4 - Resize by 70 and then by 40 - Sharpen - Position on the middle right
Open Elements 1, 2 and 3 and paste as a new layer - Resize them all by 30 - Sharpen and position under the lovehearts
See my tag for placement idea's
Open Element 12 - Resize by 60 - Sharpen - Angle to the right slightly and position above the frame layer on the left
Open Element 15 - Resize by 30 - Sharpen More and position in the windowof the shoppe
Apply Clarity and Radiance to your tubes at the settings above

Open Paper 3 and paste as a new layer - Send to the bottom and apply a mask of choice - Merge Group
Add drop shadows to your layers - Merge Visible
Add correct copyright and licence information - Merge Down
Save as a png - Add your name - Save again - Done

Friday 24 May 2013

Devil Bride - PTU


I am using the art of Danny Lee which you can find HERE
I am using the PTU Scrapkit Dark Bride made to match the tube by Bibi and can be found HERE
Font of Choice

Filters Used:
Xero - Radiance - 128, 100, 55, 140

Open a new image 600x600
Open Element 35 and paste as a new layer
Resize by 60 - Sharpen and position in the centre
Open Element 81 and paste as a new layer - Position on the top left of the frame
Open Element 77 - Resize by 50 - Sharpen and position on the left
Open Element 28 - Paste as a new layer - Resize by 120 - Sharpen and send to the bottom
Open Element 67 - Resize by 80 - Sharpen and send to the bottom
Open Element 73 and paste as a new layer - Resize by 80 - Sharpen and position under the tower on the left
Open Element 75 and paste as a new layer - Resize by 40 - Sharpen More and position on the tower
Open Element 85 and paste as a new layer - Resize by 80 and sharpen
Position on the bottom right of the tag
Open your tube and paste as a new layer - Resize if necessary and position on the right
Open Element 36 and position the top right of the frame - Resize by 50 - Sharpen
Duplicate and position below the original - Merge Down
I changed the colour of this to match my tube
Duplicate and position on the left of the frame
Open Element 22 - Resize by 60 - Sharpen and position behind the tube on the right
Open Element 107 and paste as a new layer - Resize by 80 - Sharpen - Position on the flowers on the right
Open Element 95 and paste as a new layer - Resize by 95 - Send to the bottom
Open Element 108 and paste as a new layer - Position on top of the previous layer
Click inside the purple frame with your magic wand - Selections - Modify - Expand by 5
Open your close up tube and paste - Selections - Invert - Delete - Select None and move under the frame
Change the blend mode to Overlay
Apply Radiance to your tube at the settings above

Add drop shadows to your layers - Merge Visible
Add correct copyright and licence numbers - Merge Down
Save as a png - Add your name - Save again - Done

Thursday 23 May 2013

Sexy Sailor - PTU

 I am using the art of Ninaste which you can find HERE
I am using the PTU Scrapkit Sexy Sailor Girl by Hania Designs made to match the tube which can be found HERE
Mask of Choice
Font of Choice

Filters Used:
Xero - Radiance - 128, 100, 191, 140

Open a new image 600x600
Open Element 14 - Image - Mirror and resize by 70 - Sharpen
Position on the right of the tag
Open Element 15 - Resize by 90 - Sharpen and position on the left over the previous layer
Open Element 3 - Resize by 80 - Sharpen  and position below the 2 wave layers
Open Element 45 - Resize by 90 - Sharpen and position on the bottom left
Open Element 87 and paste as a new layer - Resize by 85 - Sharpen
Send to the bottom right - Duplicate - Image - Mirror and merge down - Send to the bottom
Open Element 55 - Resize by 80 - Sharpen - Position in the middle above the previous layer
Open Element 67 and paste as a new layer - Resize by 50 - Sharpen and position on the bottom right under the wave layer
Open Element 34 - Image - Mirror - Resize by 80 - Sharpen - Position along the bottom
Open Element 7 - Resize by 50 - Sharpen and position on the bottom right
Open Element 20 - Resize this by 70 - Sharpen and position above the bench layer but below the waves
Open Element 13 - Resize by 80 - Sharpen - Position to the right and move to below the bench layer
Open Element 97 - Resize by 70 - Sharpen - Position over the parasol layer
Click inside with your magic wand - Selections - Modify - Expand by 6 - Open Paper 4 and paste
Open your close up tube and position in the frame - When happy - Selections - Invert - Delete - Select None and move both under the frame layer
Change the blend mode of the tube to Luminance
Stay on that layer and open Element 50 - Paste as a new layer on the bottom and duplicate twice more
Move above one another and merge down when happy
Open your tube and paste as a new layer - Resize and position on the left hand side under the sea layers
Open Element 75 - Resize by 50 - Sharpen - Image - Mirror and position on the top right over the lighthouse
Open Element 40 - Resize by 60 - Sharpen and position under the tube layer - Angle Slightly
Apply Radiance to your tube at the settings above

Open Paper 7 and paste as a new layer - Send to the bottom and apply a mask of choice - Merge Group
Add drop shadows to your layers - Merge Visible
Add correct copyright and licence information - Merge Down
Save as a png - Add your name - Save again - Done

Wednesday 22 May 2013

Inspirational Woman - PTU

 I am using the art of Jennifer Janesko which you can find HERE
I am using the PTU Scrapkit Time is Beautiful by Foxy's Designz and you can find this HERE
Mask of Choice
Font of Choice

Filters Used:
Gradient Glow - Black 3

Open a new image 600x600
Open Frame 3 and paste as a new layer
Resize by 60 - Sharpen and position in the cente
Open your Wordart - Resize by 50 and then by 80 - Sharpen and position around the frame
Click inside the frame with your magic wand
Selections - Modify - Expand by 5
Open Paper 2 and paste as a new layer
Open your tube and position - When happy - Duplicate and hide for now
Selections - Invert - Delete - Select None on both the tube and paper layer
Unhide the duplicate and erase the overhanging parts
Click on the frame layer - Open Element 14 - Resize by 60 and position towards the bottom
Open Element 19 - Resize by 50 - Sharpen - Send to the bottom of the frame
Duplicate - Image - Mirror - Image - Flip - Merge Down and send to the bottom
Open Element 9 - Resize by 70 - Sharpen - Position in the middle and send to the bottom
Duplicate - Image - Flip and merge down
Click on the paper layer - Open Element 34 - Resize by 80 - Sharpen - Position in the centre
Click on the frame - Open Element 38 - Resize by 40 - Sharpen and position on the top right
Apply Gradient Glow at the settings above to both tube layers
Open Paper 7 and paste as a new layer - Send to the bottom and apply a mask of choice - Merge Group
Open Paper 8 and apply the same mask as before - Resize by 95 - Change the blend mode to Luminance L

Add drop shadows to your layers - Merge Visible
Add correct copyright and licence information - Merge Down
Save as a png - Add your name - Save again - Done

Tuesday 21 May 2013

Love n Marriage - PTU


 
I am using the art of Zlata_M which you can find HERE
I am using the PTU Scrapkit Black Rose made to match the tube by Skyscraps which you can find HERE
Font of Choice

Open a new image 600x600
Open Element 76 and paste as a new layer
Resize by 85 - Sharpen and position in the centre
Click inside with your magic wand
Selections - Modify - Expand by 10
Open Paper 2 and paste as a new layer
Paste a close up of your tube and position on the left - Duplicate - Image - Mirror and merge these down
Selections - Invert - Delete - Select None and move the layers under the frame
Change the blend mode of the close ups to Hard Light
Open your main tube and paste as a new layer
Position in the centre of the frame resizing if necessary
Open Element 57 and resize by 80 - Sharpen and position on the bottom of the tag
Erase some of the tube that may be sticking out of the bottom
Open Element 30 - Resize by 30 - Sharpen and position on the bottom right
Open Element 80 and paste as a new layer - Send to the bottom and move toward the top
Open Element 65 - Resize by 80 - Sharpen - Position below the cat and move to the right
Open Element 66 - Repeat the above steps and mirror - Merge these down when happy
Open Element 49 - Resize by 50 twice - Sharpen and position above the frame on the right
Duplicate - Image - Mirror and merge these down when happy
Open Element 32 - Resize by 50 and position on the left
Open Element 33 - Resize by 50 and sharpen - Position on the top right
Open Element 9 - Resize by 90 - Sharpen - Send to the bottom and move to the top
Open Element 8 and paste - Resize by 50 - Sharpen - Position to the left and move to above the frame layer
Open Element 52 - Resize by 60 - Sharpen - Image - Mirror and position on the bottom left
Open Element 67 - Resize by 70 - Sharpen and position on the top right
Click on the top of the white frame - Open Element 68 - Resize by 50 - Sharpen and position on the left - Duplicate - Image - Mirror - Merge Down when happy

Add drop shadows to your layers - Merge Visible
Add correct copyright and licence information - Merge Down
Save as a png - Add your name - Save again - Done


Sultry n Angelic - PTU

 I am using the art of Keith Garvey which you can find HERE
I Purchased this whilst he was at PTE
I am using the PTU Scrapkit Nina 2 by Skyscraps which you can find HERE
Font of Choice

Filters Used:
Xero - Radiance - 128, 115, 164, 134

Open a new image 600x600
Open Element 58 and paste as a new layer
Position at the bottom and apply a mask of choice - Merge Group
Open Element 83 and paste as a new layer
Resize by 60 - Sharpen and position to the left of the tag
Open Element 42 and paste as a new layer
Resize by 70 - Sharpen and position on the top left of the tag - Move under the castle
Open Element 29 and paste as a new layer - Resize by 85 - Sharpen
Position on the right and move under the floor layer
Open Element 28 and paste - Position in the middle of the tag
Open Element 32 - Paste as a new layer and position on the bottom of the fence
Open Element 27 and paste as a new layer
Resize by 40 - Sharpen - Position on the right of the fence - Duplicate - Image - Mirror and merge down when happy
Position below the grass layer
Open Element 89 and paste as a new layer - Resize by 45 - Sharpen and as before - Image - Mirror and merge down when happy
Move above the previous layer
Open Element 61 - Resize by 80 - Sharpen - Position on the left of the grass
Duplicate - Image - Mirror - Merge Down
Open Element 68 - Resize by 80 - Sharpen - Position on the bottom left of the tag
Open Element 70 - Resize by 85 - Send to the bottom
Click on the castle layer and open element 40 - Position
Open your tube and paste as a new layer
Position in the centre and apply Radiance at the settings above

Add drop shadows to your layers - Merge Visible
Add correct copyright and licence information - Merge Down
Save as a png - Add your name - Save again - Done

Hey Minnie - PTU


I am using the art of Lady Mishka which you can now find HERE
I purchased this while she was at SATC but she is now at PFD
I am using the PTU Scrapkit Oh Minnie by Designs by Sarah made to match the tube which you can find HERE
Mask of Choice
Font of Choice

Filters Used:
Xero - Radiance - 128, 50, 128, 137

Open a new image 600x600
Open Frame 3 and paste as a new layer
Resize by 90 - Sharpen and position to the top of the tag
Click inside all 3 with your magic wand
Selections - Modify - Expand by 10
Open Paper 8 and paste as a new layer
Open your close up tube and position
Selections - Invert - Delete - Select None and move both the tube and paper layer under the frame
Change the blend mode of the tube to Luminance L
Open your main tube and paste as a new layer
Resize and position on the bottom of the tag
Open Print 5 - Resize by 80 - Sharpen - Position in the centre
Duplicate - Image - Mirror - Merge Down
Open String 1 and paste as a new layer - Send to the bottom and position under the top of the frame
Open lips - Resize by 30 - Sharpen and paste on the top right of the frame
Open Print 4 - Paste as a new layer - Resize by 80 - Sharpen - Send to above the grey layer
Open Print 2 and paste - Resize by 85 - Sharpen - Position between the white and grey layers
Click on the frame layer - Open Ribbon 1 and paste as a new layer - Resize by 95 - Position on the bottom of the frame
Open Flower 4 and paste as a new layer - Resize by 50 - Sharpen and position under the lips layer
Open Flower 6 - Resize by 40 - Sharpen and position under the previous layer
Click on the frame layer - Open Sparkles - Image - Mirror and position
Apply Radiance to your tube at the settings above

Open Paper 1 and paste as a new layer - Send to the bottom and apply a mask of choice - Merge group
Add drop shadows to your layers - Merge Visible
Add correct copyright and licence information - Merge Down
Save as a png - Add your name - Save again - Done

Monday 20 May 2013

Mysterious Billie - PTU

 I am using the art of Christine Marie Kotlark which you can find HERE
I am using the PTU Scrapkit Mysterious Midnight by Tiny Turtle Designs which you can find HERE
Mask of Choice
Font of Choice

Open a new image 600x600
Open Element 5 and paste as a new layer - Resize by 85 - Sharpen and position in the centre
Open your tube and place as a new layer
Position in the centre of the sofa so it looks as if he is sitting on it
Open Element 64 and paste as a new layer
Resize by 40 - Sharpen and position on the bottom centre over his foot
Duplicate - Image - Mirror and merge Visible
Open Element 79 and paste as a new layer - Resize by 50 - Sharpen and position to the far left - Duplicate - Image - Mirror and merge down
See my tag for placement ideas
Open Element 7 and paste as a new layer
Resize by 40 - Sharpen and position behind the sofa on the top right
Open Element 3 and paste as a new layer - Resize by 60 - Sharpen and position on the right
Place above the sofa layer behind the berries
Open Element 23 and paste as a new layer - Resize by 90 and send to the bottom
Open Element 96 and paste as a new layer - Position on the left and send to above the previous layer
Staying on that layer - Open Element 42 - Resize by 80 and move up slightly so you can see it
Open Element 19 - Resize by 30 - Sharpen More and position on the left arm of the chair
Open Element 2 and paste as a new layer - Resize by 40 - Sharpen and position on the bottom left of the tag
Open Element 52 - Position this below the sofa layer
Open Element 119 and paste as a new layer - Image - Flip and position above the previous layer

Open Paper 1 and paste as a new layer - Send to the bottom and apply a mask of choice - Merge Group
Add drop shadows to your layers - Merge Visible
Add correct copyright and licence information - Merge Down
Save as a png - Add your name - Save again - Done

Sunday 19 May 2013

Summer Paradise - FTU



I am using the art of Carlos Cartagena which you can find HERE
I am using the FTU Scrapkit Summer Fun by Tasha's Playground and you can find this HERE
2 Masks of Choice
Font of Choice

Filters Used:
Xero Radiance - 216, 146, 173, 94

Open a new image 600x600
Open Frame 2 - Image - Rotate - Free Rotate - 90 Left and paste on your canvas - Position in the centre
Click inside all frames with your magic wand
Selections - Modify - Expand by 5
Open Paper 5 and position in the frames
Open your tube or close up of your tube and position in the 2 corner frames
When happy - Selections - Invert - Delete on both the tube and paper layers
Move under the frame and change the blend mode of the tubes to Lighten
Open your main tube and paste as a new layer
Position her in the middle frame
Open Tiki Torch 2 and paste - Resize by 80 - Sharpen and position on the right of the tag
Open Tiki Torch 1 - Resize by 70 and position next to the previous layer
Open the Palm Tree and paste as a new layer - Image - Mirror and resize by 90 - Position on the left of the tag
Open Shells and paste as a new layer - Resize by 40 - Sharpen
Position on the bottom left - Duplicate - Image - Mirror and merge down
Making sure the shells are under the tube layer
Open Sand - Resize by 80 - Sharpen and move under the shells layer
Open Water and resize by 80 aswell - Sharpen and position under the sand layer
Move the palm tree and tiki torch layers so they are under the shells layer
Open the Surfboard - Paste as a new layer and position under the tube - Resize by 80 - Sharpen
Apply Radiance to your tube layer at the settings above

Open Paper 4 and paste as a new layer - Send to the bottom and apply a mask of choice - Merge group
Open Paper 1 and paste as a new layer - Apply another mask of choice - Merge Group and change the blend mode to Multiply
Add drop shadows to your layers - Merge Visible
Add correct copyright and licence information - Merge Down
Save as a png - Add your name - Save again - Done


Saturday 18 May 2013

Adventureland - PTU

I am using the art of Barbara Jensen which you can find HERE
I am using the PTU Scrapkit A Magic Adventure part 1 - Back to the Wild by PO Concept which you can find HERE
Font of Choice

Open a new image 600x600
Open Element 28 and paste as a new layer - Position in the centre
Click inside with your magic wand
Selections - Modify - Expand by 5
Open Paper 8 and paste as a new layer - Position
Open your tube as a new layer
Position and when happy - Duplicate and hide for now - Selections - Invert - Delete on the tube and paper layer
Move under the frame and unhide the duplicate - Erase the overhanging parts of the tube
Open Element 78 and paste as a new layer - Resize by 30 - Sharpen and position toward the top of the paper layer so it looks as if it is lying in the distance
Open Element 4 - Resize by 70 - Sharpen and position toward the top of the paper layer - Move under the cat layer
Open Element 53 - Resize by 60 - Sharpen and position under the frame on the right hand side
Open Element 10 - Paste as a new layer - Resize by 90 - Sharpen and position on the bottom right
See my tag for placement idea's
Open Element 13 - Paste as a new layer - Resize by 40 - Sharpen and position on the bottom of the tube 
Duplicate twice more and position next to each other - Merging down when happy
Click on the paper layer - Open Element 90 - Resize by 80 and position to the left
Open Element 29 - Resize by 110 and send to the bottom
Open Element 6 - Resize by 80 - Sharpen and position over the grassy layers at the bottom
Open Element 80 - Image - Mirror and position in between the 2 frames on the right
Open Element 34 - Image - Mirror - Resize by 40 - Sharpen and position on the right of the elephant
Open Element 70 - Resize by 70 - Sharpen and position on the bottom middle of the tag
Click on the paper layer above the sparkles - Open Element 93 - Resize by 60 - Sharpen and position toward the top of the paper
Open Element 2 - Resize by 50 - Sharpen and position on the bottom right below the meercat

Add drop shadows to your layers - Merge Visible
Add correct copyright and licence information - Merge Down
Save as a png - Add your name - Save again - Done



Orange Sherbert - PTU


I am using the art of Enamorte which you can find HERE
I am using the PTU Scrapkit Ice Cream Orange Sherbert by BabyCakes which you can find HERE
When you purchase this kit, you get the matching alpha absolutely FREE!!
Mask of Choice
Font of Choice

Open a new image 600x600
Open Element 8 and paste as a new layer - Resize by 60 - Sharpen - Position in the centre
Open Element 11 and paste as a new layer over the previous layer
Click inside the first frame with your magic wand
Selections - Modify - Expand by 6
Open Paper 1 and paste as a new layer
Open your tube as a new layer
Position in the frame and when happy - Duplicate and hide for now - Selections - Invert - Delete - Select None on both layers
Move under the frame layer
Click inside the second frame with your magic wand
Modify by 5 - Unhide your duplicated tube and duplicate again and hide
Selections - Invert - Delete - Select None and move under that frame
Unhide the duplicate and erase the overhanging parts of the tube
Click in between the frames - Open Element 10 - Resize by 60 - Sharpen
Send to the top - Duplicate - Image - Mirror - Image - Flip
Merge Down when happy
Open Element 7 - Resize by 30 - Sharpen - Position on the bottom right of the top frame
Duplicate and position below it - Merge Down - Duplicate - Image - Mirror - Merge Down
Duplicate - Image - Flip - Merge Down when happy
Open Element 3 - Resize by 40 - Sharpen - Rotate 90 Left
Position on the left centre of the frame - Duplicate - Image - Mirror - Merge Down
Place above the previous flower layers

Open Paper 3 and paste as a new layer - Send to the bottom and apply a mask of choice - Merge Group
Add drop shadows to your layers - Merge Visible
Add correct copyright and licence information - Merge Down
Save as a png - Add your name - I used the fab alpha that came with the kit - Saved again - Done

Friday 17 May 2013

Sexy Beach - PTU


I am using the art of Diana Gali which you can find HERE
I am using the PTU Scrapkit Sexy Fiona made to match the tube by Bibi which you can find HERE
Mask of Choice
Font of Choice

Open a new image 600x600
Open Element 9 - Resize by 60 - Sharpen and position at the bottom
Open your tube and paste as a new layer
Resize if necessary and position on the sand at the bottom of the tag
Open Element 29 - Resize by 80 - Sharpen and send to the bottom
Click inside the frame with your magic wand
Selections - Modify - Expand by 5
Open Paper 12 and paste as a new layer
Position in the frame and when happy - Selections - Invert - Delete - Select None and move under the frame
Open Element 81 and paste as a new layer - Resize by 60 - Sharpen and position on the top of the frame
Open Element 75 - Resize by 60 - Sharpen and position along the bottom
Duplicate 3 more times and position next to each other - Position one above the tube
See my tag for placement - Merge the flower layers together
Open Element 46 - Resize by 80 - Sharpen - Move below the tube to the left
Open Element 6 - Resize by 50 - Sharpen and position to the right
Move under the tube layer
Click on the paper layer - Open Element 20 - Resize by 70 - Sharpen and position
Click on the frame - Open Element 48 - Resize by 103 - Sharpen - Position on the right - Duplicate - Mirror - Merge Down

Open Paper 15 and paste as a new layer - Send to the bottom and apply a mask of choice - Merge Group
Add drop shadows to your layers - Merge Visible
Add correct copyright and licence informations - Merge Down
Save as a png - Add your name - Save again - Done

Thursday 16 May 2013

Emo Ellie - PTU



I am using the art of Ninaste which you can find HERE
I am using the PTU Scrapkit Emo Me by PO Concept which you can find HERE
Mask of Choice
Font of Choice

Open a new image 600x600
Open Element 43 and paste as a new layer
Position in the centre of your canvas
Click inside with your magic wand
Selections - Modify - Expand by 5
Make a gradient using 2 colours from your tube and floodfill the frame with it
Open a close up of your tube and position in the frame
When happy - Selections - Invert - Delete and move under the frame layer
Change the blend mode of the tube to Luminance
Open Element 73 and paste as a new layer - Resize by 60 - Sharpen
Position on the top left of the frame
Open Element 62 - Resize by 40 - Sharpen and angle to fit the tag diagonally
Duplicate - Image - Mirror - Flip - Merge Down and send to the bottom
Open Element 30 - Resize by 40 - Sharpen - Position at the bottom next to the tube
Open Element 51 - Paste as a new layer - Send to the bottom - Duplicate - Position above the original - Merge Down
Open Element 42 - Image - Mirror - Resize by 40 - Sharpen and position on the bottom left
Click on the top of the frame - Open Element 61 - Resize by 70 - Sharpen
Position at the top - Duplicate and position on the bottom - Merge down
Open Element 53 - Resize by 110 - Send to the bottom

Open Paper 10 and paste as a new layer - Send to the bottom and apply a mask of choice - Merge Group
Add drop shadows to your layers - Merge Visible
Add correct copyright and licence information - Merge Down
Save as a png - Add your name - Save again - Done

Just be a Vamp Goth - PTU


I am using the art of Sherin Moustafa which you can find HERE
I am using the PTU Scrapkit Vamp Goth by Tasha's Playground which you can find HERE
Mask of Choice
Font of Choice

Filters Used:
Xero - Radiance - 128, 50, 128, 234

Open a new image 600x600
Open Frame 1 and paste as a new layer - Position in the centre of your canvas
Open Frame 6 and position in the centre of the previous frame
Move to the bottom
Click inside the frame 6 layers with your magic wand - Selections - Modify - Expand by 5
Open Paper 3 and paste as a new layer
Selections - Invert - Delete - Select None and move under the frame
Click inside the black frame - Repeating the above steps and copy and paste paper 8 onto your canvas
Open your tube and position - When happy - Selections - Invert - Delete - Select None on both layers
Move under the black frame layer
On the paper layer - Adjust - Add/Remove Noise - Add Noise - Uniform and Mono checked - Noise 100%
Keeping on the paper layer - Open Cemetry and resize by 70 - Sharpen and position
Open Coffin - Image - Rotate - Free Rotate - 90 Right - Image - Mirror - Position in the middle of the 2 frames towards the top
See my tag for placement ideas
Click on the white frame - Open Vines and resize by 60 - Sharpen and position on the right
Open Wordart - Resize by 70 - Sharpen and position on the bottom right
Open Cross 2 - Resize by 60 - Sharpen - Position on the top right
Open Staff and position on the left
Open Skulls - Resize by 75 - Sharpen and position on the middle top of the black frame
Open Splatter - Resize by 80 - Sharpen and position on the right under the wordart
Click on the tube - Open Mist - Resize by 60 and position on the bottom
Applyinformation - Merge Down
Save as a png - Add your name - Save again - Done Radiance to your tube at the settings above

Open Paper 6 and paste as a new layer - Send to the bottom and apply a mask of choice - Merge Group
Add drop shadows to your layers - Merge Visible
Add correct copyright and licence

Wednesday 15 May 2013

Love Amelia - PTU

I am using the art of Verymany which you can find HERE
I am using the PTU Scrapkit Amelia made to match the tube by Skyscraps which you can find HERE
Mask of Choice
Font of Choice

Filters Used:
Eye Candy - Gradient Glow - Fat White and Pink

Open a new image 600x600
Open Element 73 - Paste as a new layer and resize by 70 - Sharpen and position on the bottom
Open Element 72 and paste as a new layer - Image - Flip - Image - Mirror - Position toward the top right
Open your tube and paste as a new layer - Resize if needed and position on top of the filmstrip
Open Element 75 and paste - Position at the top
Click inside all 3 frames with your magic wand
Selections - Modify - Expand by 5 - Open Paper 2 and paste as a new layer
Selections - Invert - Delete - Select None and move under the frame
Open Element 42 - Resize by 60 - Sharpen and send to the bottom
Click on the paper layer - Open Element 35 - Resize by 90 - Position in the centre
Open Element 13 - Resize by 80 - Sharpen
Position on the right - Duplicate - Image - Mirror - Merge down
Open Element 9 and paste as a new layer - Send to the bottom centre
Selections - Select All - Float - Defloat - Paste a close up tube over the flower
Selections - Invert - Delete - Select None and change the blend mode of the tube to Darken
Open Element 15 and paste - Resize by 70 - Position on the far right - Duplicate - Image - Mirror - Merge Down and send to the bottom
Click on the flower in the centre - Open Element 48 - Resize by 60 - Sharpen and position on the left - Duplicate - Image - Mirror and merge down
Apply Gradient glow to the frame at the settings above

Open Paper 3 and paste as a new layer - Send to the bottom and apply a mask of choice - Merge Group
Add drop shadows to your layers - Merge Visible
Add correct copyright and licence information - Merge Down
Save as a png - Add your name - Save again - Done

Tuesday 14 May 2013

FTU Cluster Frame

I have made a FTU PU Only Cluster made using Kizzed by Kelz PTU Scrapkit Ren which you can find HERE 


The link to download is HERE

Sunday 12 May 2013

Rens Mindfreak - PTU


I am using the art of Christine Marie Kotlark which you can find HERE
I am using the PTU Scrapkit Ren by Kizzed by Kelz which you can find HERE
Mask of Choice
Font of Choice

Filters Used:
Eye Candy - Gradient Glow - Fat - White and Dark Grey

Open a new image 600x600
Open Skull Chain and paste as a new layer
Resize by 110 - Sharpen and position in the centre
Click inside with your magic wand
Selections - Modify - Expand by 5
Open Paper 10 and paste as a new layer
Open your tube and position in the frame
When happy - Duplicate and hide for now
Selections - Invert - Delete - Select None on both layers and move under the frame
Unhide the tube and using your eraser tool - Erase the overhanging parts of the tube
Open Stars Spiral and resize by 110 - Send to the bottom
Click on the frame - Open Speakers and paste as a new layer
Position on the right - Duplicate - Image - Mirror - Merge Down
Open Music notes and paste as a new layer - Send to the bottom and position between the speakers
Open WA and paste - Resize by 60 - Sharpen and position on the left speaker pole
Apply Gradient Glow at the settings above
Open Crows - Resize by 75 - Sharpen - Send to the top and move to the bottom
Open Guitar - Image - Rotate - 20 Right and move to above the speaker on the right
Open PA sign and paste - Resize by 30 - Sharpen and position on top of the right speaker
Open Keys - Resize by 70 - Sharpen - Send to above the frame on the bottom

Open Paper 15 and paste as a new layer - Send to the bottom and apply a mask of choice - Merge Group
Add drop shadows to your layers - Merge Visible
Add correct copyright and licence information - Merge Down
Save as a png - Add your name - Save again - Done

Saturday 11 May 2013

Sexy Pink Birthday Diva - PTU

 I am using the art of Diana Gali which you can find HERE
This is one of the gorgeous birthday tubes which you can get free with an $7 Purchase!
I am using the PTU Scrapkit Bday Diva made by Bibi for the tube and you can find this HERE
You can get this and other gorgeous kits and cu goodies free with a $10 Purchase!
Mask of Choice
Font of Choice

Open a new image 600x600
Open Element 42 and paste as a new layer - Position to the right
Click inside with your magic wand - Selections - Modify - Expand by 5
Open Paper 1 and paste as a new layer - Position
Open your tube and position - Duplicate and hide for now
Selections - Invert - Delete - Select None and move both under the frame
Unhide the duplicate and erase the overhanging parts
Open Element 41 and paste - Image - Rotate - Free Rotate - 90 Left
Click inside all 4 frames with your magic wand - Modify by 5 and Open Paper 7
Open a close up of your tube and position in the frame
When happy - Selections - Invert - Delete on both layers - Select None
Move both under the frame layer and change the blend mode of the tube to Luminance
Merge these 3 layers together and place on the top left under the previous frame
Open Element 36 - Resize by 85 - Send to the bottom
Open Element 33 and paste as a new layer - Resize by 80 - Sharpen and send to the bottom
Click on the white frame - Open Element 30 - Resize by 70 - Sharpen and position
See my tag for placement idea's
Click on the black frame - Open Element 35 - Resize by 30 - Sharpen
Position at the top of the frame
Open Element 8 - Paste as a new layer - Position on the left centre of the white frame
Open Element 2 - Resize by 60 - Sharpen - Position on the far left
Open Element 59 - Image - Mirror - Resize by 50 - Sharpen
Position on the right of the tower
Click on the paper layer in the white frame - Open Element 7 and paste - Position
Open Element 62 and paste as a new layer - Resize by 80 - Sharpen and position over the top of the middle lantern
Using your deform tool - Angle it so it fits the frame a bit better

Open Paper 5 and paste as a new layer - Send to the bottom and apply a mask of choice - Merge Group
Add drop shadows to your layers - Merge Visible
Add correct copyright and licence information - Merge Down
Save as a png - Add your name - Save again - Done

Friday 10 May 2013

Birthday Champ - PTU

 I am using the art of Michi Art which you can find HERE
I am using the PTU Scrapkit Ice Cream Birthday Cake by LHD which you can find HERE
These are released on the 10th and when you purchase the kit, you get the add on and alpha absolutely FREE!!
Mask of Choice
Font of Choice

Open a new image 600x600
Open Frame 3 and paste as a new layer
Position in the centre
Click inside with your magic wand - Selections - Modify - Expand by 5
Open Paper 3 and paste as a new layer
Open your tube and paste - Position and duplicate - Hide for now
Selections - Invert - Delete on both the paper and tube layer - Select None
Move both under the frame - Unhide the duplicated tube - Using your eraser tool - Erase the bottom overhanging part
Open Wordart - Resize by 70 - Sharpen and place at the bottom
Open Element 21 and paste - Resize by 50 - Sharpen
Position on the left of the wordart
Open Element 12 and paste - Resize by 80 - Sharpen - Position on the right
Click on the paper layer - Open Element 12 - Resize by 90 - Position on the left
Open Element 5 - Resize by 50 - Sharpen
Position on the right below the wordart
Open Element 15 - Resize by 60 - Sharpen - Position on the left above the frame
Open Element 10 and paste as a new layer - Resize by 60 - Sharpen and position between the balloon and cake layer on the left

Open Paper 1 and paste as a new layer - Send to the bottom and apply a mask of choice - Merge group
Add drop shadows to your layers - Merge Visible
Add correct copyright and licence information - Merge Down
Save as a png - Add your name - Save again - Done

Dark Angel - PTU

 I am using the art of Ninaste which you can find HERE
I am using the PTU Scrapkit Angeline 1 made to match the tube by Tiny Turtle Designs which you can get HERE
Mask of Choice
Font of Choice

Filters Used:
Xero - Radiance - 128, 128, 128, 134

Open a new image 600x600
Open Element 120 and paste as a new layer
Resize by 85 - Sharpen and position in the centre
Open Element 4 and paste as a new layer
Resize by 60 - Sharpen and position below the red frame
Click inside the black frame with your magic wand
Selections - Modify - Expand by 5
Open Paper 33 and paste as a new layer
Open your close up tube and position
Selections - Invert - Delete - Select None and move both the paper and tube layer under the frame
Change the blend mode of the tube to Luminance L
Open Element 2 and paste as a new layer
Resize by 50 - Sharpen and position on the bottom right
Open your tube and paste as a new layer - Resize if necessary and position on the right
Click on the frame layer - Open Element 115 and paste as a new layer - Send to the bottom
Open Element 90 - Resize by 40 - Sharpen and position on the bottom left
Open Element 42 - Resize by 30 and then by 70 - Sharpen and position on the left of the frame
Click on the frame layer - Open Element 72 - Resize by 60 - Sharpen and position on the top left of the frame
Duplicate - Image - Mirror and merge down
Click on the frame layer - Open Element 44 - Resize by 80 - Sharpen and position in the top centre
See my tag for placement ideas
Keeping on the same layer - Open Element 32 - Resize by 40 and sharpen - Position next to the cake layers
Apply Radiance to your tube layer at the settings above

Open Paper 26 and paste as a new layer - Send to the bottom and apply a mask of choice - Merge Group
Add drop shadows to your layers - Merge Visible
Add correct copyright and licence information - Merge Down
Save as a png - Add your name - Save again - Done

Thursday 9 May 2013

Comic Girl Fun - PTU

 I am using the art of Celine which you can find HERE
I am using the PTU Scrapkit Comic Girl made to match the tube by Bibi and you can find this HERE
Mask of Choice
Font of Choice

Open a new image 600x600
Open Element 18 and paste as a new layer - Resize by 70 - Sharpen
Position in the centre towards the bottom slightly
Open Element 30 and paste - Resize by 45 - Sharpen and place in the centre of the road
Open Element 12 and paste as a new layer
Resize by 75 - Sharpen - Position in the centre and move under the road
Open Element 37 and paste as a new layer
Resize this by 75 - Sharpen and position on the right below the car layer
Open Element 94 and paste - Resize by 80 - Sharpen
Send this to the bottom and move to the top slightly
Open Element 81 and paste as a new layer
Send to below the car layer in the centre
Duplicate - Image - Mirror and merge down when happy
Open your tube as a new layer and paste
Position on the right of the tag and resize if necessary
Open Element 17 and paste - Resize by 80 - Sharpen and position next to the tube
Open Element 67 and paste as a new layer
Resize by 70 - Sharpen and position next to the dog
Open Element 41 and paste - Position on the far left of the road
Open Element 44 and paste - Position under the monster and bunny layer
Open Element 19 and paste - Position on the top left of the tag
Open Element 53 and paste as a new layer - Position under the car layer and place in the centre
Open Element 95 - Resize by 80 - Sharpen and send to the bottom
Open Element 4 and send to the bottom
Open Element 25 and paste as a new layer - Resize by 60 - Sharpen and position on the top left
Open Element 26 - Resize by 80 - Sharpen and position in the top centre
Open Element 1 and paste as a new layer - Resize by 60 and Sharpen - Position on the right and move to below the car layer

Open Paper 10 and paste as a new layer - Resize by 70 - Sharpen and apply a mask of choice - Merge Group
Add drop shadows to your layers - Merge Visible - Add correct copyright and licence information - Merge Down
Save as a png - Add your name - Save again - Done

Wednesday 8 May 2013

Colourful Elegance - PTU

 I am using the art of Anna Marine which you can find HERE
I am using the PTU Scrapkit Anna Marine Package 45 by Rebel Dezigns which you can find HERE
This is tut 3 of 3
Mask of Choice
Font of Choice

This is going to be a very quick tut!

Open a new image 600x600
Open Frame 5 and paste as a new layer
Resize by 90 - Sharpen and position in the centre
Click inside with your magic wand
Selections - Modify - Expand by 5
Open Paper 7 and paste as a new layer
Position in your frame - Selections - Invert - Delete - Select None and move under the frame
Open your tube and paste as a new layer
Position in the centre of the heart
Open Element 18 - Resize by 60 - Sharpen
Position on the left of the frame
Open Element 7 - Paste as a new layer - Resize by 30 - Sharpen
Position on the bottom part of the heart - Duplicate 5 more times and arrange at the bottom
Merge these layers together
Open Element 38 - Paste as a new layer - Resize by 60 - Sharpen - Position on the right moving under the tube
Open Element 39 - Resize by 70 - Sharpen - Angle to the left a little bit and place beneath the flowers on the bottom left
Duplicate - Image - Mirror - Resize by 70 and position

Open Paper 9 and paste as a new layer - Send to the bottom and apply a mask of choice - Merge group
Add drop shadows to your layers - Merge Visible
Add correct copyright and licence information - Merge down
Save as a png - Add your name - Save again - Done

Tuesday 7 May 2013

Beach Beauty - PTU

 I am using the art of Diana Gali which you can find HERE
I am using the PTU Scrapkit Roxanne by Bibi made to match the tube which you can find HERE
Mask of Choice
Font of Choice

Filters Used:
Tramages - Tow the Line - Default
Xero - Porcelain - Default - Set blue to 0

Open a new image 600x600
Open Element 19 - Paste as a new layer and position in the centre
Open Element 55 and paste - Resize by 60 - Sharpen and position in the centre
Click inside with your magic wand
Selections - Modify - Expand by 5 - Open Paper 11 and paste as a new layer
Selectioms - Invert - Delete - Select None and move under the frame
Apply Tramages at the settings above on the paper layer
Open Element 83 and paste - Resize by 80 - Sharpen - Position on the left of the frame
Duplicate - Image - Mirror and merge down
Open Element 89 and paste as a new layer - Position on the top left of the frame
Open Element 72 - Image - Mirror - Position on the right of the frame
Open Element 99 and paste - Resize by 80 - Sharpen - Position on the bottom right of the tag
Open Element 100 - Image - Flip - Resize by 60 - Sharpen - Position on the bottom of the canvas
See my tag for placement idea's
Open your tube and paste as a new layer - Position in the centre of the tag and duplicate
Send the duplicate to below the stone layers - Using your eraser tool - On the original tube layer - Erase the bottom part of the tube
Apply Porcelain to both tube layers at the settings above
Open Element 23 and paste - Resize by 60 - Sharpen - Position on the bottom left of the stones and erase some of the overhanging parts
Click on the frame layer - Open Element 86 and paste as a new layer - Resize by 90
Open Element 94 - Image - Mirror - Resize by 40 - Sharpen and position on the bottom right of the stones
Open Element 33 - Resize by 80 - Sharpen and position below the sign on the left

Open Paper 4 and paste as a new layer - Send to the bottom and apply a square mask of choice - Merge Group
Add drop shadows to your layers - Merge Visible
Add correct copyright and licence information - Merge Down
Save as a png - Add your name - Save again - Done

Sea Maiden - PTU


I am using the art of Spazz which you can find HERE
I am using the PTU Scrapkit Melody of the Sea by Designs by Sarah and you can find this HERE
Mask of Choice
Font of Choice

Filters Used:
Xero - Radiance - 55, 91, 128, 134

Open a new image 600x600
Open Arch and paste as a new layer
Resize this by 60 - Sharpen and position in the centre of your canvas
Open Plant 10 - Resize by 80 - Sharpen and position in front of the arch
Open Boat and paste as a new layer
Resize by 70 - Sharpen and position between the 2 previous layers
Open Dolphins - Image - Mirror - Image - Resize by 80 and position at the top right of the arch
Open Plant 1 and paste as a new layer - Resize this by 80 - Sharpen and position on the bottom left of the arch
Duplicate - Image - Mirror and merge down when happy
Open Plant 7 - Resize by 90 and send to the bottom
Open Fish 6 and paste as a new layer
Resize this by 40 - Sharpen more and position on the middle right to the far side
See my tag for placement ideas
Open Plant 2 - Resize by 40 - Sharpen and position in the bottom centre
Open Plant 4 and repeat the above steps - Position next to the previous layer
Open Chest and paste as a new layer - Resize by 50 - Sharpen - Image - Mirror and place at the bottom left
Open Sparkles 2 and paste as a new layer - Resize by 80 - Sharpen and position over the top of the tag
Open Bubbles - Image - Mirror - Resize by 70 - Sharpen and place in the centre
Place below the chest layer
Open Swirls 2 and paste as a new layer - Send to the bottom
Open your tube and place as a new layer - Send to the bottom of the tag and apply Radiance at the settings above

Open Paper 10 and paste as a new layer - Send to the bottom and apply a mask of choice - Merge Group
Add drop shadows to your layers - Merge Visible
Add correct copyright and licence information - Merge Down
Save as a png - Add your name - Save again - Done